
They say that buying a house is both an investment and an expense. Despite the high cost of living, you have a permanent place to stay without spending on rental expenses.
On the other hand, there is always a maintenance expenditure involved most especially if your house is way long in years.
Speaking of maintenance, one of the areas that need more attention compared to others are the gutters. Probably the most battered part of the house due to change of weather conditions, gutters need a lot of inspection, cleaning and de-clogging.
Here we will give you three easy steps to maintain your gutter and keep it solid before it rusts and breaks apart.
On the other hand, there is always a maintenance expenditure involved most especially if your house is way long in years.
Speaking of maintenance, one of the areas that need more attention compared to others are the gutters. Probably the most battered part of the house due to change of weather conditions, gutters need a lot of inspection, cleaning and de-clogging.
Here we will give you three easy steps to maintain your gutter and keep it solid before it rusts and breaks apart.
Inspect and Clean
During the spring and autumn season, expect your gutters to be full of leaves. When this happens, you have a long day of cleaning work to do.
Inspect areas of gutters that have been clogged by rubbish elements. Sweep them off and wash them away with streams of water.
Make sure that all materials have been cleared to prevent further damage. Also, check if water flows smoothly through the gutter. It is better if you can inspect for rusts, flakes leaks, and peeling paints that are found in your gutters.
If so, get your brushes and paint ready for another long painting job for you to do
Inspect areas of gutters that have been clogged by rubbish elements. Sweep them off and wash them away with streams of water.
Make sure that all materials have been cleared to prevent further damage. Also, check if water flows smoothly through the gutter. It is better if you can inspect for rusts, flakes leaks, and peeling paints that are found in your gutters.
If so, get your brushes and paint ready for another long painting job for you to do
De-clog
De-clogging is another easy step that you can after thorough inspection and clean-up in your gutters. If you have observed that water still doesn’t flow through, it’s time to check the downspout. Clogs can happen where the downspout is connected to the gutter.
If clogging still persists, you can run a garden hose through the downspout and turn on the pressure to the maximum level. Go full blast until the clog that you can’t see is totally removed.
Make sure that the clog doesn’t get tighter. What you want to happen is for it to be taken away for your water to smoothly run through your gutter, into your downspout and out
If clogging still persists, you can run a garden hose through the downspout and turn on the pressure to the maximum level. Go full blast until the clog that you can’t see is totally removed.
Make sure that the clog doesn’t get tighter. What you want to happen is for it to be taken away for your water to smoothly run through your gutter, into your downspout and out
Paint
As mentioned on the first step, you have a long day of painting job to do if you have rusty gutters in your house. Once you have cleared your gutters, don’t forget to remove it from its braces to get your painting job done efficiently.
There are spots that are harder to reach and so it is wiser if you separate them for the moment.
In every good work, it always requires patience to get it done perfectly. Same goes with painting. The way you paint your gutters is you apply a primer coat first to get your surface accept the paint.
It improves the sticking and helps prevent your gutter for further damage. Second is you apply first coat of your paint. Apply it evenly on the surface and make sure no spot is left unpainted.
To make it look for appealing to your eyes, apply the second coat after 24 hours to get the job done the way you wanted it
There are spots that are harder to reach and so it is wiser if you separate them for the moment.
In every good work, it always requires patience to get it done perfectly. Same goes with painting. The way you paint your gutters is you apply a primer coat first to get your surface accept the paint.
It improves the sticking and helps prevent your gutter for further damage. Second is you apply first coat of your paint. Apply it evenly on the surface and make sure no spot is left unpainted.
To make it look for appealing to your eyes, apply the second coat after 24 hours to get the job done the way you wanted it
Action Step

Now that we’ve given you a list of easy DIY steps to do, you may not have the freedom of time to actually do it. If that’s the case, there are companies that offer painting services to help you maintain your gutters.
In Winnipeg, these companies offer a list of services that are suitable for your house maintenance needs. You look them up in Google and contact your most preferred painter to perform the services.
Let them handle the job professionally while you relax or work at home. To learn more about home painting, follow us today at http://www.paintstucco.com/.
In Winnipeg, these companies offer a list of services that are suitable for your house maintenance needs. You look them up in Google and contact your most preferred painter to perform the services.
Let them handle the job professionally while you relax or work at home. To learn more about home painting, follow us today at http://www.paintstucco.com/.